AT Command Manual for Firmware L23
3.6.14. +CSIM Generic SIM access
Description
Send command to SIM
Test if command is supported
Parameters
<length>
Integer type
<command>
String type
<response>
String type
Clarification
To comply with AT&T test cases, the current implementation only supports
AT+CSIM=10, A0F2000002 All other SIM commands are not supported.
3.6.15. +CRSM Restricted SIM access
Description
Send command to SIM
Test if command is supported
Parameters
<command>
176
(READ BINARY)
178
(READ RECORD)
WA_DEV_WISMO_UGD_012
Command
+CSIM=<length>,<command>
+CSIM=?
Description
Length of the characters that are sent to TE in <command> or <response> (two times
the actual length of the command or response)
Description
Command passed on by the MT to the SIM in the format as described in GSM 51.01
Hexadecimal character format
Description
Response to the command passed on by the SIM to the MT in the format as described
in GSM 51.011
Hexadecimal character format
Command
+CRSM=<command>[,<fileid>
[,<P1>,<P2>,<P3>[,<data>]]]
+CRSM=?
Description
Read a transparent EF
Transparent file greater than 256 bytes are not supported:
P1 shall always be 0 (ERROR otherwise)
P2 shall be in the range 0-256
Read a record
Only P2="04" (absolute mode) is supported
(Other parameters are not useful).
Rev 004
3GPP TS 27.007 Commands
Possible Response(s)
+CSIM: <length>,<response>
OK
+CME ERROR: <err>
OK
+CME ERROR: <err>
Possible Response(s)
+CRSM: <sw1>,<sw2>[,<response>]
OK
+CME ERROR: <err>
OK
November 3, 2011
75