Cpbr Read Phonebook Entries - Sierra Wireless AirPrime WS Series At Command Manual

AT Command Manual for Firmware L23
<used>
Integer type
<total>
Integer type
Clarification
"SM" corresponds to SIM/UICC phonebook (global phonebook) If a SIM card is present or if a UICC
with an active GSM application is present, the EFADN under DFTelecom is selected. If a UICC with
an active USIM application is present, the global phonebook, DFPHONEBOOK under DFTelecom is
selected.
"AP" corresponds to selected application phonebook (local phonebook). If a UICC with an active
USIM application is present, the application phonebook, DFPHONEBOOK under ADFUSIM is
selected.
When "FD" is selected as <storage>, the SIM PIN2 request is displayed and the request to change
<storage> is disregarded. "FD" must be selected as <storage> again after SIM PIN2 has been
entered to change <storage>.
+CPBS parameter is automatically saved into non-volatile memory.
The <storage> parameter is restored to default value by AT&F command.

3.6.10. +CPBR Read phonebook entries

Description Command
+CPBR=<index1>
Read entries
[,<index2>]
Get location
+CPBR=?
ranges
Parameters
<indexn>
Integer type
<number>
String type
WA_DEV_WISMO_UGD_012
Description
Value indicating the number of used locations in selected memory
Description
Value indicating the total number of locations in selected memory
Possible Response(s)
[+CPBR: <index1>,<number>,<type>,
<text>[,<hidden>][,<group>][,<adnumber>][,<adtype>][,<secondtext>][,
<email>]]
[[...]
<CR><LF>+CPBR:<index2>,<number>,
<type>,<text>
[,<hidden>][,<group>][,<adnumber>][,<adtype>][,<secondtext>][,<email
>]]]
OK
+CME ERROR: <err>
+CPBR:
(list of supported<index>s)[,<nlength>][,<tlength>][,<glength>][,<slengt
h>][,<elength>]
OK
+CME ERROR: <err>
Description
Values in the range of location numbers of phonebook memory
Description
Phone number of format <type>
Rev 004
3GPP TS 27.007 Commands
November 3, 2011 71