Udp Socket - Sierra Wireless AirPrime WS Series At Command Manual

AT Command Manual for Firmware L23
AT+WIPBR=4,5,0
OK
AT+WIPCREATE=2,1,"ip addr",80
OK
+WIPREADY: 2,1
AT+WIPDATA=2,1,1
CONNECT
...
+++
OK
AT+WIPCLOSE=2,1
OK
9.7.3.

UDP Socket

AT+WIPCFG=1
OK
AT+WIPBR=1,6
OK
AT+WIPBR=2,6,11,"APN name"
OK
AT+WIPBR=2,6,0,"user name"
OK
AT+WIPBR=2,6,1,"passwd"
OK
AT+WIPBR=4,6,0
OK
AT+WIPCREATE=1,1,80,"www.wavecom.com"
,80
OK
+WIPREADY: 1,1
WA_DEV_WISMO_UGD_012
//start IP stack
//open GPRS bearer
//set APN name of GPRS bearer
//set user name
//set password
//start GPRS bearer
//create a UDP client towards peer IP device @
//"www.wavecom.com" , port 80
//all parameters and IP stack behavior are OK
//unsolicited: the UDP client socket is "pseudo" connected
//to the peer (no //real connection is //UDP)
Rev 004
//start GSM bearer
//create a TCP client towards peer IP device @ "ip addr",
//port 80
//all parameters and IP stack behavior are OK
//unsolicited: the TCP client socket is connected to the
//peer
//exchange data on socket idx 1
//read, write
//switch to AT mode
//close the TCP client socket index 1
November 3, 2011
TCP/IP Commands
204