Creg Network Registration - Sierra Wireless AirPrime WS Series At Command Manual

AT Command Manual for Firmware L23
Description Command
Test if
command is +CNUM =?
supported
Parameters
<alphax>
String type
<numberx>
String type
<typex>
Integer type
<speed>
Integer type
<service>
0
1
2
3
4
5
<itc>
0
1
Clarification
Using the <alphax> parameter will return an empty string as this parameter is not supported.
3.4.2.

+CREG Network registration

Description
Control +CREG notification
Get current registration status
WA_DEV_WISMO_UGD_012
Possible Response(s)
+CNUM: (0-1),(list of supported <typex>s)
OK
+CME ERROR: <err>
Description
Alphanumeric string associated with <numberx>; used character set should be the one
selected with +CSCS (Not supported)
Description
Phone number
Description
Type of address
Description
Same as +CBST
Description
Asynchronous modem
Synchronous modem
PAD Access (asynchronous)
Packet Access (synchronous)
Voice
Fax
Description
3,1 kHz
UDI
Command
+CREG=[<n>]
+CREG?
Rev 004
3GPP TS 27.007 Commands
Possible Response(s)
OK
+CME ERROR: <err>
+CREG: <n>,<stat>[,<lac>,<ci>]
OK
November 3, 2011 43