Cr Service Reporting; Ceer Extended Error Report - Sierra Wireless AirPrime WS Series At Command Manual

AT Command Manual for Firmware L23
<ver1>
0
<T4>
7
3.2.6.

+CR Service reporting

Description
Select service reporting mode
Get current mode
Get supported modes
Parameters
<mode>
0 (default value)
1
Omitted
Clarification
The <mode> parameter is automatically saved into non-volatile memory and restored to default value
by AT&F command.
3.2.7.

+CEER Extended error report

Description
Get last error report
Test if command is supported
Parameters
<report>
String type
CauseSelect <cs>
0 (No cause)
WA_DEV_WISMO_UGD_012
Description
RLP version
Description
Re-sequencing period T4 in integer format
Command
+CR=[<mode>]
+CR?
+CR=?
Description
Disable reporting
Enable reporting
Use previous value
Command
+CEER
+CEER=?
Description
String "Cause Select:<cs> Cause:<c>" is returned
<cs> and <c> are numbers representing the CauseSelect and Cause
Cause <c>
0 (No cause)
Rev 004
3GPP TS 27.007 Commands
Possible Response(s)
OK
+CME ERROR: <err>
+CR: <mode>
OK
+CR: (list of supported <mode>s)
OK
Possible Response(s)
+CEER: <report>
OK
OK
November 3, 2011 38