AT Command Manual for Firmware L23
accept new incoming connections), any peer trying to connect to the server will receive an accept ()
9.4.2.
Closing a Service +WIPCLOSE
9.4.2.1.
Description
The +WIPCLOSE command is used to close a socket.
9.4.2.2.
Syntax
Action command
AT+WIPCLOSE=<protocol>,<idx>
OK
Read Command
AT+WIPCLOSE?
NONE
Test Command
AT+WIPCLOSE=?
OK
Unsolicited response
+WIPPEERCLOSE: <protocol>,<idx>
9.4.2.3.
Parameters and Defined Values
<protocol>:
protocol type
1
2
3
<idx>:
Definition
Socket identifier
WA_DEV_WISMO_UGD_012
UDP
TCP client
TCP server
This parameter is the index of the socket created with the +WIPCREATE command.
Rev 004
TCP/IP Commands
November 3, 2011
184