AT Command Manual for Firmware L23
Parameters
<num>
0..255
Clarification
S1 parameter is saved into non-volatile memory by AT&W command and restored to default value by
AT&F command.
5.1.4.
S2 Escape character
Description
Set escape character
Read escape character
Parameters
<esc>
43
5.1.5.
S11 DTMF Dialing Speed
Description
Set DTMF dialing speed
Parameters
<time>
0..999
Clarification
This command is supported for compatibility purpose and has no effect on ME (simple response OK).
5.1.6.
S95 Windows XP compatibility
Description
Windows XP compatibility
WA_DEV_WISMO_UGD_012
Description
Counts the number of rings detected on the line. It is cleared if a ring is not detected
over an eight seconds time period. Default value: 0
Command
S2=<esc>
S2?
Description
Escape character 43 (i.e „+‟)
Command
S11=<time>
Description
DTMF dialing speed
Command
S95=<time>
Rev 004
Possible Response(s)
OK
ERROR
<esc>
OK
Possible Response(s)
OK
ERROR
Possible Response(s)
OK
ERROR
November 3, 2011
Hayes Commands
117