Cmut Mute Control; Cacm Accumulated Call Meter; Camm Accumulated Call Meter Maximum - Sierra Wireless AirPrime WS Series At Command Manual

AT Command Manual for Firmware L23

3.6.18. +CMUT Mute control

Description
Mute/unmute call
Get current mode
Get supported values
Parameters
<n>
0
1

3.6.19. +CACM Accumulated call meter

Description
Reset ACM
Get current ACM
Test if command is supported
Parameters
<passwd>
String type
<acm>
String type

3.6.20. +CAMM Accumulated call meter maximum

Description
Set ACMmax
Get current
ACMmax
WA_DEV_WISMO_UGD_012
Command
+CMUT=<n>
+CMUT?
+CMUT=?
Description
Mute off
Mute on
Command
+CACM=[<passwd>]
+CACM?
+CACM=?
Description
SIM PIN2
Description
Accumulated call meter value similarly coded as <ccm> under +CAOC
Command
+CAMM=[<acmmax>[,<passwd>]]
+CAMM?
Rev 004
3GPP TS 27.007 Commands
Possible Response(s)
OK
+CME ERROR: <err>
+CMUT: <n>
OK
+CME ERROR: <err>
+CMUT: (list of supported <n>s)
OK
Possible Response(s)
OK
+CME ERROR: <err>
+CACM: <acm>
OK
+CME ERROR: <err>
OK
+CME ERROR: <err>
Possible Response(s)
OK
+CME ERROR: <err>
+CAMM: <acm>
OK
+CME ERROR: <err>
November 3, 2011 78