AT Command Manual for Firmware L23
8.5.5.
*PSCSP Customer Service Profile
Description
Set command
Read CSP
Get supported values
Description
Command used to read the CSP file in SIM.
Set command has no effect (OK returned).
Parameters
<service group
code>
String type
<status>
String type
8.5.6.
+PACSP Customer Service Profile query by ME
Description
Read command
Test command
Unsolicited response
Description
This command allows the ME to query the statue of Customer Service Profile in SIM (EF-CSP).
Parameters
<status>
Description
0
SIM with CSP disable
WA_DEV_WISMO_UGD_012
Command
*PSCSP
*PSCSP?
*PSCSP=?
Description
Hexadecimal representation of a coding group as defined in CPHS recommendation
("01".."09", "C0", "D5")
Description
Bitfield representation of each element of a service group
(ex: "11000000")
Command
AT+PACSP?
AT+PACSP=?
Rev 004
Possible Response(s)
OK
+CME ERROR: <err>
[*PSCSP: <service group code>, <status>
[ [...]<CR><LF>*PSCSP: <service group
code>, <status>] ]
+CME ERROR: <err>
* PSCSP: (list of supported <service group
code>s)
OK
+CME ERROR: <err>
Possible Response(s)
+PACSP: <status>
OK
(none)
+PACSP: <status>
Note: Unsolicited response returned when power up if SIM with EF-
CSP; no unsolicited response if SIM does not have EF-CSP.
Proprietary AT Commands
November 3, 2011
138