Wgprs Gprs Multislot Class - Sierra Wireless AirPrime WS Series At Command Manual

AT Command Manual for Firmware L23
<PBCCH>
Integer type
<PAT>
Integer type
<TA>
Integer type
Clarification
If the parameter is not available, it will be shown as - or 255.
8.7.7.

+WGPRS GPRS multislot class

Description
Action
Read
Test
Unsolicited
response
Description
This Sierra Wireless proprietary command modifies GPRS multislot class parameter.
Parameters
<mode> Description
Definition of the GPRS multislot class. This parameter represents the GPRS class chosen by
the user to perform power saving (by reducing TX
4
/uplink time slots).
only <class> is used
<class>:
GPRS or EGPRS multislot class number.
<class> Description
2 Multislot class 2
8 Multislot class 8
10 Multislot class 10 (default)
WA_DEV_WISMO_UGD_012
Description
If PBCCH is present, PBCCH ARFCN is displayed else "-" or if Frequency Hopping is
used "H"
Description
Priority Access Threshold (GSM Rec, 04.08 / 10.5.2.37b). Supported values 0-4
Description
Timing Advance value
Command
AT+WGPRS=<mode>,,,<class>
AT+WGPRS?
AT+WGPRS=?
Rev 004
Possible Response(s)
OK
+WGPRS: <mode>,<class>
OK
+WGPRS: (list of supported <mode>s),(),(),(list of
supported <class>s)
OK
<None>
November 3, 2011
Proprietary AT Commands
166