Psfsnt Field Strength Notification - Sierra Wireless AirPrime WS Series At Command Manual

AT Command Manual for Firmware L23
<validity>
2
3
Clarification
CNAP (Calling Name Presentation) is a supplementary service provided by the network. +CNAP
command enables or disables the presentation of the name provided by the network.
8.7.3.

*PSFSNT Field strength notification

Description
Select notification mode
Get the current mode
Description
This command allows presentation of field strength notification.
Set command enable (or disable) the presentation of *PSFS each time field strength increase or
decrease of 5 dBm.
Description
Field strength notification
Parameters
<mode>
0
1
<field strength>
0
1..62
63
255
Clarification
The values defined are not the same as for +CSQ command.
WA_DEV_WISMO_UGD_012
Description
Name unavailable
Name presentation restricted
Command
*PSFSNT=<mode>
*PSFSNT?
Result code
*PSFS: <field strength>
Description
Disable presentation of notification
Enable presentation of notification
Description
GSM RX level is less than -110 dBm
GSM RX level is less than -109..-48 dBm
GSM RX level is greater than -48 dBm
GSM RX level is unavailable
Rev 004
Proprietary AT Commands
Possible Response(s)
OK
+CME ERROR: <err>
PSFSNT: <mode>
OK
November 3, 2011 160