AT Command Manual for Firmware L23
7.2.
Capabilities Identification and Control
7.2.1.
+FCLASS Model identification
Description
Set class
Get current class
Get supported value
Parameters
<class>
0
1
7.2.2.
+FTH HDLC transmit
Description
Set mode
Get current mode
Get supported modes
Parameters
<mode>
3
Clarification
Set command is sent to ME only when link is online data mode.
This command is only relevant for in Fax mode.
7.2.3.
+FRH HDLC receive
Description
Set mode
WA_DEV_WISMO_UGD_012
Command
+FCLASS=<class>
+FCLASS?
+FCLASS=?
Description
Data mode
Fax class 1 (TIA-578-A) mode
Command
+FTH=<mode>
+FTH?
+FTH=?
Description
V21 channel 2300 bps
Command
+FRH=<mode>
Rev 004
Possible Response(s)
OK
+CME ERROR: <err>
+FCLASS: <class>
OK
+FCLASS: (list of supported <class>s)
OK
Possible Response(s)
OK
+CME ERROR: <err>
+FTH: <mode>
OK
+FTH: (list of supported <mode>s)
OK
Possible Response(s)
OK
+CME ERROR: <err>
November 3, 2011
TIA578A Commands
125