AT Command Manual for Firmware L23
Clarification
Using the <alpha> parameter will return an empty string as this parameter is not supported.
3.5.3.
+COLP Connected line identification presentation
Description
Connected Line Identification
Presentation
Parameters
<number>
String type
<type>
Integer type
<subaddr>
String type
<satype>
Integer type
<alpha>
String type
Clarification
Using the <alpha> parameter will return an empty string as this parameter is not supported.
3.5.4.
+CCWA Calling Line Identification Presentation
Description
Call waiting notification
Parameters
<number>
String type
WA_DEV_WISMO_UGD_012
Result code
+COLP: <number>,<type>[,<subaddr>,<satype>[,<alpha>]]
Description
Phone number
Description
Type of address
Description
Subaddress of format specified by <satype>
Description
Type of subaddress
Description
Alphanumeric representation of <number> corresponding to the entry found in
phonebook; used character set should be the one selected with +CSCS (Not
supported)
Result code
+CCWA: <number>,<type>,<class>[,<alpha>][,<CLI
validity>[,<subaddr>,<satype>]]
Description
Phone number
Rev 004
3GPP TS 27.007 Commands
November 3, 2011
61