Csmp Set Text Mode Parameters - Sierra Wireless AirPrime WS Series At Command Manual

AT Command Manual for Firmware L23
Parameters
<mode>
0
1
<mids>
String type
<dcss>
String type
Clarification
All the <dcss> values can be accepted or up to 5 different <dcss> values can be accepted.
Ranges are not supported for <mids> and <dcss>, i.e notation "0,1,5,320-478,922" is not allowed for
<mids> and notation "0-3,5" is not allowed for <dcss> .
Up to 15 different <mids> values can be accepted.
AT+CSCB=1 means all <dcss> are accepted but this command has no effect on the list of the <mids>
accepted. To modify those lists: use before the AT+CSCB=0 command to select no mid and no dcs,
and after this operation, add some dcs or mid to the current lists.
AT+CSCB=0,<mids> adds the <mids> values in the <mids> current list handled by the mobile.
AT+CSCB=0,,<dcss> adds the <dcss> values in the <dcss> current list handled by the mobile.
not added.
AT+CSCB=1,<mids> removes the <mids> values in the <mids> current list handled by the mobile.
AT+CSCB=1,,<dcss> removes the <dcss> values in the <dcss> current list handled by the mobile.
AT+CSCB? can only display an enabled list, so <mode> = 0 is returned.
2.2.3.

+CSMP Set Text Mode Parameters

Description
Select SM
parameters
Get current values
Test if command is
supported
WA_DEV_WISMO_UGD_012
Description
Message types specified in <mids> and <dcss> are accepted
Message types specified in <mids> and <dcss> are not accepted
Description
all different possible combinations of CBM message identifiers (refer <mid> in 27.005)
Description
all different possible combinations of CBM data coding schemes (refer <dcs> in
27.005)
Default value: no DCS accepted
Command
+CSMP=[<fo>[,<vp>[,<pid>[,<dcs>]]]]
+CSMP?
+CSMP=?
Rev 004
3GPP TS 27.005 Commands
Possible Response(s)
OK
+CMS ERROR: <err>
+CSMP: <fo>,<vp>,<pid>,<dcs>
OK
+CMS ERROR: <err>
OK
+CMS ERROR: <err>
November 3, 2011 17