Psengi Network Information - Sierra Wireless AirPrime WS Series At Command Manual

AT Command Manual for Firmware L23
Description
Call notification
Parameters
<mode>
0
1
<call id>
0
1..7
> 8
<status>
0
1
<number>
String type
Clarification
Special case: to inform that current waiting call has been disconnected: *PSCALL: 0,0 is sent.
The +CLCC command can be used to get more information about a specific call.
8.7.6.

*PSENGI Network information

Description
Select an information to
retrieve
WA_DEV_WISMO_UGD_012
Result code
*PSCALL: <call Id>,<status>[,<number>]
Description
Disable notification
Enable notification
Description
Waiting call (alerting, no call id assigned yet)
Speech call ID
Data call id
Description
Disconnected
Connected
Description
Phone number (when <status>=1)
Command
*PSENGI=<mode>
Rev 004
Proprietary AT Commands
Possible Response(s)
If <mode>=0
*PSSCI:
(see <mode> parameter for details)
If <mode>=1
*PSNCI:
(see <mode> parameter for details)
If <mode>=2
*PSGDMI:
(see <mode> parameter for details)
If <mode>=3
*PSQI:
(see <mode> parameter for details)
If <mode>=4
*PSGPRS:
(see <mode> parameter for details)
OK
+CME ERROR: <err>
November 3, 2011 162