Cimi Request International Mobile Subscriber Identity; Cmux Multiplexing Mode - Sierra Wireless AirPrime WS Series At Command Manual

AT Command Manual for Firmware L23
3.1.6. +CIMI Request international mobile subscriber
identity
Description
Read IMSI
Test if command is supported
Parameters
<IMSI>
String type (without double quotes)
3.1.7.

+CMUX Multiplexing mode

Description Command
+CMUX=<mode>[,<subset>[,<port_speed>
[,<N1>[,<T1>
Activate MUX
protocol [,<N2>[,<T2>[,<T3>
[,<k>]]]]]]]]
Read current
+CMUX?
settings
Get
supported +CMUX=?
values
Parameters
<mode>
0
1
<subset>
0
(default)
1
<port_speed>
1
WA_DEV_WISMO_UGD_012
Command
+CIMI
+CIMI=?
Description
Basic option
Advanced option
Description
UIH frames used only
UI frames used only
Description
9 600 bits/s
Rev 004
Possible Response(s)
<IMSI>
OK
+CME ERROR: <err>
OK
+CME ERROR: <err>
Description
International Mobile Subscriber Identity (IMSI)
Possible Response(s)
OK
+CME ERROR: <err>
+CMUX: <mode>,[<subset>],<port_speed>,
<N1>,<T1>, <N2>,<T2>,<T3>[,<k>]
OK
+CMUX: (list of supported <mode>s),(list of
supported <subset>s),(list of supported
<port_speed>s),(list of supported <N1>s),(list
of supported <T1>s),(list of supported
<N2>s),(list of supported <T2>s),(list of
supported <T3>s),(list of supported <k>s)
OK
3GPP TS 27.007 Commands
November 3, 2011 33