Service Option Handling +Wipopt - Sierra Wireless AirPrime WS Series At Command Manual

AT Command Manual for Firmware L23
9.4.2.4. Parameter Storage
None
9.4.2.5. Possible Errors
is displayed.
"+CMEE" AT error code
802
803
830
831
834
837
9.4.2.6. Examples
Command
AT+WIPCLOSE=1,1
Note: Close UDP socket with communication index 1
AT+WIPCLOSE=2,1
Note: Close TCP client with communication index 1
AT+WIPCLOSE=3,1
Note: Close TCP server with communication index 1
9.4.2.7. Notes
After issuing the +WIPCLOSE command, no more data can be sent and received over the socket.
socket is active or not.
9.4.3.

Service Option Handling +WIPOPT

9.4.3.1. Description
The +WIPOPT command is used to read and/or to configure different parameters on sockets.
WA_DEV_WISMO_UGD_012
Description
not enough memory
operation not allowed in the current TCP/IP stack state
bad index
bad state
not implemented
bad protocol
Responses
OK
OK
OK
Rev 004
TCP/IP Commands
November 3, 2011 185