Psinfn Information Number - Sierra Wireless AirPrime WS Series At Command Manual

AT Command Manual for Firmware L23
<status> Description
1 SIM with CSP enable
Examples
Command
AT+PACSP?
Note: Query EF-CSP status
Clarification
This command is available when the SIM has finished its initialization.
8.5.7.

*PSINFN Information number

Description Command
Get
*PSINFN=<index1>[,<index 2]
information
number entries
Read
*PSINFN
command
Get supported
*PSINFN=?
values
Description
Set command returns phonebook entries in location number range <index1>... <index2> from
Information Number SIM file. If <index2> is left empty, only location <index1> is returned. If all queried
locations are empty (but available), no information text lines may be returned (only an OK is returned).
If listing fails in a ME error, +CME ERROR: <err> is returned.
Read command has no effect (returns OK).
Information number shall only be presented to TE if field InformationsNumbers of CSP file is 0xFF,
use AT*PSCSP? to check Service Group D5. Otherwise +CME ERROR: <err> is returned.
Parameters
<index>
<index1>
<index2>
0..255
WA_DEV_WISMO_UGD_012
Possible responses
+PACSP: 1
OK
Note: Current EF-CSP status
+PACSP: 1
Note: Unsolicited response once SIM initialized
Description
Index of information number phonebook entry
Rev 004
Possible Response(s)
[*PSINFN: <index1>,<number>,<type>,<text>,<Net
Id>,<Prem Id>,<Level>
[[...]<CR><LF>*PSINFN:
<index2>,<number>,<type>,<text>,<Net Id>,<Prem
Id>,<Level>]
OK
+CME ERROR: <err>
OK
+CME ERROR: <err>
*PSINFN: (list of supported
<index>s)[,<nlength>][,<tlength>]
OK
+CME ERROR: <err>
November 3, 2011
Proprietary AT Commands
139