AT Command Manual for Firmware L23
recommendation.
SIM toolkit- SET UP CALL
Values 30..33 for <state> are used when a SET UP CALL proactive command has been received
from the SAT. This call is initiated internally in the ME by STK. *PSCSCS notification will be
broadcasted as URC: the MO call has been initiated by STK, no AT channel is associated to the call.
Examples:
MO speech alerting at distant and initiated on line 1
*PSCSCS: 1, 4, 1,,, 1, , ,
MT data
8.7.2.
+CNAP Calling Name Presentation
Description
Control +CNAP URC
Get status of CNAP
Get supported values
Parameters
<n>
0
1
<m>
0
1
2
<validity>
0
1
WA_DEV_WISMO_UGD_012
Command
+CNAP=<n>
+CNAP?
+CNAP=?
Description
+CNAP notification is disabled
Enabled unsolicited result code: +CNAP: <name>,<validity>
Description
Network does not provide the CNAP service
Network provides the CNAP service
Unknown (e.g. no network, etc.)
Description
Name presentation allowed
Presentation restricted
Rev 004
Proprietary AT Commands
Possible Response(s)
OK
+CME ERROR: <err>
+CLIR: <n>,<m>
OK
+CME ERROR: <err>
+CNAP: (list of supported <n>s)
OK
+CME ERROR: <err>
November 3, 2011
159