Icf Te-Ta Character Framing - Sierra Wireless AirPrime WS Series At Command Manual

AT Command Manual for Firmware L23
Description
Get current rate
Get supported values
Parameters
<rate>
0
1200
2400
4800
9600
19200
38400
57600
115200 (default)
Clarification
+IPR parameter is automatically saved in non-volatile memory.
When in Auto-Baud (+IPR=0):
the capital letter A must be entered to detect the DTE baud rate.
all AT commands must be in capital letters.

4.3.11. +ICF TE-TA character framing

Description
Set TE-TA character
framing
Get current value
Get supported values
Parameters
<format>
3 (default)
<parity>
3 (default)
WA_DEV_WISMO_UGD_012
Command
+IPR?
+IPR=?
Description
Automatic rate detection
1200 bps
2400 bps
4800 bps
9600 bps
19200 bps
38400 bps
57600 bps
115200 bps
Command
+ICF=[<format>[,<parity>]]
+ICF?
+ICF=?
Description
8 data bits, 1 stop bit
Description
space
Rev 004
ITU-T V25.ter Commands
Possible Response(s)
+IPR: <rate>
OK
+IPR: (list of supported auto-detectable
<rate>s)[,( list of supported fixed-only <rate>s)]
OK
Possible Response(s)
OK
+CME ERROR: <err>
+ICF: <format>,<parity>
OK
+ICF: (list of supported <format>s),(list of
supported<parity>s)
OK
November 3, 2011 113