Call Control Commands; Csta Select Type Of Address; Cmod Call Mode - Sierra Wireless AirPrime WS Series At Command Manual

AT Command Manual for Firmware L23
Parameter name
<subset>
<port_speed>
<N1>
<T1>
<N2>
<T2>
<T3>
<k>
Default values are used when +CMUX parameters are left out.
+CMUX parameters are restored to default values by AT&F command.
3.2.

Call Control Commands

3.2.1.

+CSTA Select type of address

Description
Select type of address
Get current type
Get supported types
Parameters
<type>
129 (default)
145
Omitted
Clarification
The <type> parameter is automatically saved into non-volatile memory and restored to the default
value by AT&F command.
3.2.2.

+CMOD Call mode

Description
Select call mode
WA_DEV_WISMO_UGD_012
Command
+CSTA=[<type>]
+CSTA?
+CSTA=?
Description
National type of address
International type of address
Use previous value
Command
+CMOD=[<mode>]
Rev 004
3GPP TS 27.007 Commands
Default value
0x00
0x05
0x1F
0x0A
0x03
0x1E
0x0A
0x02
Possible Response(s)
OK
+CME ERROR: <err>
+CSTA: <type>
OK
+CME ERROR: <err>
+CSTA: (list of supported <type>s)
OK
+CME ERROR: <err>
Possible Response(s)
OK
+CME ERROR: <err>
November 3, 2011 35