Cmgr Read Message - Sierra Wireless AirPrime WS Series At Command Manual

AT Command Manual for Firmware L23
Description Command
Get supported
+CMGL=?
values
Parameters
<stat>
0
"REC UNREAD"
1
"REC READ"
2
"STO UNSENT"
3
"STO SENT"
4
"ALL"
For all other parameters, refer to 27.005 §3.1 Parameter Definitions.
Other parameters are extracted from memory storage.
Clarification
Only SMS-SUBMIT and/or SMS-DELIVER can be read.
SMS-COMMAND are not supported.
CBM are not stored in ME/TA memory. CBM are not saved in SIM.
Using the <alpha> parameter will return an empty string as this parameter is not supported.
2.3.4.

+CMGR Read Message

Description Command
Read a
+CMGR=<index>
message
WA_DEV_WISMO_UGD_012
Possible Response(s)
+CMGL: (list of supported <stat>s)
OK
+CMS ERROR: <err>
Description
Received unread message (i.e. new message)
Received read message
Stored unsent message
Stored sent message
All messages
Possible Response(s)
if text mode (+CMGF=1), command successful and SMS-DELIVER:
+CMGR: <stat>,<oa>,[<alpha>],<scts>[,<tooa>,<fo>,<pid>,<dcs>,
<sca>,<tosca>,<length>]<CR><LF><data>
OK
if text mode (+CMGF=1), command successful and SMS-SUBMIT:
+CMGR: <stat>,<da>,[<alpha>][,<toda>,<fo>,<pid>,<dcs>,[<vp>],
<sca>,<tosca>,<length>]<CR><LF><data>
OK
if PDU mode (+CMGF=0) and command successful:
+CMGR: <stat>,[<alpha>],<length><CR><LF><pdu>
OK
otherwise:
+CMS ERROR: <err>
Rev 004
3GPP TS 27.005 Commands
November 3, 2011 23