Cmgf Messages Format - Sierra Wireless AirPrime WS Series At Command Manual

AT Command Manual for Firmware L23
Description Command
Get current
+CPMS?
storage status
Get supported
+CPMS=?
storages
Parameters
<memx>
"SM"
<usedx>, <totalx>
Integer type
2.1.3.

+CMGF Messages Format

Description
Select message format
Get current format
Get supported formats
Parameters
<mode>
0 (default)
1
Omitted
Clarification
+CMGF parameter is automatically saved into non-volatile memory.
The <mode> parameter is restored to default value by AT&F command.
WA_DEV_WISMO_UGD_012
Possible Response(s)
+CPMS: <mem1>,<used1>,<total1>,<mem2>,<used2>,<total2>,
<mem3>,<used3>,<total3>
OK
+CMS ERROR: <err>
+CPMS: (list of supported <mem1>s),(list of supported
<mem2>s),(list of supported <mem3>s)
OK
+CMS ERROR: <err>
Description
Only "SM" storage is supported
"BM", "ME", "MT", "TA", "SR" memory locations are not supported
Description
Computed value
Command
+CMGF=[<mode>]
+CMGF?
+CMGF=?
Description
PDU mode
Text mode
Use previous value
Rev 004
3GPP TS 27.005 Commands
Possible Response(s)
OK
+CMS ERROR: <err>
+CMGF: <mode>
OK
+CMGF: (list of supported <mode>s)
OK
November 3, 2011 15