Clip Calling Line Identification Presentation; Clir Calling Line Identification Restriction - Sierra Wireless AirPrime WS Series At Command Manual

AT Command Manual for Firmware L23
<oldpwd>
<newpd>
String type
<pwdlength>
Integer type
3.4.7.

+CLIP Calling line identification presentation

Description
Control +CLIP notification
Get status of CLIP
Get supported values
Parameters
<n>
0 (default)
1
<m>
0
1
2
Clarification
+CLIP parameter is automatically saved in non-volatile memory.
The <n> parameter is restored to default value by AT&F command.
3.4.8.

+CLIR Calling line identification restriction

Description
Control +CLIR
WA_DEV_WISMO_UGD_012
Description
<oldpwd> shall be the same as password specified for the facility from the MT user
interface or with command Change Password +CPWD and <newpwd> is the new
password; maximum length of password can be determined with <pwdlength>
Description
Maximum length of the password for the facility
Command
+CLIP=[<n>]
+CLIP?
+CLIP=?
Description
Disable +CLIP notification
Enable +CLIP notification
Description
CLIP not provisioned
CLIP provisioned
Unknown (e.g. no network, etc.)
Command
+CLIR=[<n>]
Rev 004
3GPP TS 27.007 Commands
Possible Response(s)
OK
+CME ERROR: <err>
+CLIP: <n>,<m>
OK
+CME ERROR: <err>
+CLIP: (list of supported <n>s)
OK
+CME ERROR: <err>
Possible Response(s)
OK
+CME ERROR: <err>
November 3, 2011 49