Ccwa Call Waiting - Sierra Wireless AirPrime WS Series At Command Manual

AT Command Manual for Firmware L23
<subaddr>
String type
<satype>
Integer type
<class>
1
2
4
7 (default)
<time>
1..30
<status>
0
1

3.4.11. +CCWA Call waiting

Description Command
Control call
+CCWA=[<n>[,<mode>[,<class>]]]
waiting
Get current
+CCWA?
mode
Get
supported +CCWA=?
values
Parameters
<n>
0
1
WA_DEV_WISMO_UGD_012
Description
Subaddress of format specified by <satype>
Description
Type of subaddress
Description
Voice (telephony)
Data (refers to all bearer services; with <mode>=2 this may refer only to some bearer
service if TA does not support values 16, 32, 64 and 128)
Fax (facsimile services)
All
Description
When "no reply" is enabled or queried, this gives the time in seconds to wait before call
is forwarded
Default value: 20
Description
Not active
Active
Description
Disable presentation of +CCWA
Enable presentation of +CCWA
Rev 004
Possible Response(s)
When <mode>=2 and command successful:
+CCWA: <status>,<class1>[<CR><LF>+CCWA:
<status>,<class2> [...]]
OK
+CME ERROR: <err>
+CCWA: <n>
OK
+CME ERROR: <err>
+CCWA: (list of supported <reason>s)
OK
+CME ERROR: <err>
3GPP TS 27.007 Commands
November 3, 2011 52