AT Command Manual for Firmware L23
2.2.
Message Configuration Commands
2.2.1.
+CSCA Service Center Address
Description
Update SMSC address
Get current format
Get supported formats
Parameters
<sca>
String type
<tosca>
Integer type
Clarification
This command reads and writes the service center address in EF-SMSP (U)SIM file.
If the SCA is not readable or empty, read command returns an empty string.
At switch on, the SCA is read on (U)SIM to have a default SCA for send and write command in text
mode. (In PDU mode, SCA can be provided in PDU).
Service Center Address is reset on switch on and is read on SIM on first PC connection after switch
on.
See data stored by +CSAS for default values.
2.2.2.
+CSCB Select Cell Broadcast Messages Types
Description
Select CBM types
Get current values
Get supported
modes
WA_DEV_WISMO_UGD_012
Command
+CSCA=<sca>[,<tosca>]
+CSCA?
+CSCA=?
Description
SC address Address-Value
Description
SC address Type-of-Address
Command
+CSCB=[<mode>[,<mids>[,<dcss>]]]
+CSCB?
+CSCB=?
Rev 004
3GPP TS 27.005 Commands
Possible Response(s)
OK
+CMS ERROR: <err>
+CSCA: <sca>,<tosca>
OK
+CMS ERROR: <err>
OK
+CMS ERROR: <err>
Possible Response(s)
OK
+CMS ERROR: <err>
+CSCB: <mode>,<mids>,<dcss>
OK
+CMS ERROR: <err>
+CSCB: (list of supported <mode>s)
OK
+CMS ERROR: <err>
November 3, 2011
16