AT Command Manual for Firmware L23
4.1.13. S10 Automatic disconnect delay
Description
Set time
Read current register value
Parameters
<time>
0..255
Clarification
This command is supported for compatibility purpose and has no effect on ME (simple response OK).
4.1.14. T Tone dialing
Description
Set dial tone
Clarification
This command is supported for compatibility purpose and has no effect on ME (simple response OK).
4.2.
General TA Control Commands
4.2.1.
A/ Repeat last command
Description
Repeat the last command line
4.2.2.
I Identification information
Description
Request identification
information
WA_DEV_WISMO_UGD_012
Command
S10=<time>
S10?
Description
Amount of time from when the modem recognizes a loss of carrier to when it will hang
up
Command
T
Command
A/
Command
I[<value>]
Rev 004
ITU-T V25.ter Commands
Possible Response(s)
OK
+CME ERROR: <err>
<time>
OK
+CME ERROR: <err>
Possible Response(s)
OK
Possible Response(s)
Same as the last command
Possible Response(s)
<text>
OK
+CME ERROR: <err>
November 3, 2011
104