Cgsms Select Service For Mo Sms Messages - Sierra Wireless AirPrime WS Series At Command Manual

AT Command Manual for Firmware L23
Description
Get supported values
Parameters
<n>
0 (default)
1
2
<stat>
0
1
2
3
4
5
<lac>
String type
<ci>
String type
Clarification
+CGREG parameter is automatically saved into non-volatile memory.
The <n> parameter is restored to default value by AT&F command.

3.10.11. +CGSMS Select service for MO SMS messages

Description
Set SMS service
WA_DEV_WISMO_UGD_012
Command
+CGREG=?
Description
Disable network registration unsolicited result code
Enable network registration unsolicited result code +CGREG: <stat>
Enable network registration and location information unsolicited result code +CGREG:
<stat>[,<lac>,<ci>]
Description
Not registered, MT is not currently searching an operator to register to
The GPRS service is disabled, the UE is allowed to attach for GPRS if requested by
the user
Registered, home network
Not registered, but MT is currently trying to attach or searching an operator to register
to
The GPRS service is enabled, but an allowable PLMN is currently not available. The
UE will start a GPRS attach as soon as an allowable PLMN is available.
Registration denied
The GPRS service is disabled, the UE is not allowed to attach for GPRS if requested
by the user.
Unknown
Registered, roaming
Description
Two bytes location area code in hexadecimal format (e.g. "00C3" equals 195 in
decimal)
Description
Two bytes cell ID in hexadecimal format
Command
+CGSMS= <service>
Rev 004
3GPP TS 27.007 Commands
Possible Response(s)
+CGREG: (list of supported <n>s)
OK
+CME ERROR: <err>
Possible Response(s)
OK
+CME ERROR: <err>
November 3, 2011 95