AT Command Manual for Firmware L23
<value>
5
Clarification
Voice call disconnection is also dependant of +CVHU settings.
4.1.5.
L Monitor speaker loudness
Description
Set Loudness
Parameters
<volume>
0..9
Clarification
This command is supported for compatibility purpose and has no effect on ME (simple response OK).
4.1.6.
M Monitor speaker mode
Description
Set mode
Parameters
<mode>
0..9
Clarification
This command is supported for compatibility purpose and has no effect on ME (simple response OK).
4.1.7.
O Online
Description
Switch to online mode
WA_DEV_WISMO_UGD_012
Description
Disconnect waiting call (either speech or data) but does not disconnect other active
calls (either CS speech, CS data or GPRS) on the channel the command is requested.
(Rejection of incoming call).
Command
L<volume>
Description
Volume
Command
M<mode>
Description
Mode
Command
O[<type>]
Rev 004
ITU-T V25.ter Commands
Possible Response(s)
OK
+CME ERROR: <err>
Possible Response(s)
OK
+CME ERROR: <err>
Possible Response(s)
CONNECT[<speed>]
NO CARRIER
November 3, 2011
101