Psric Ri Behaviour - Sierra Wireless AirPrime WS Series At Command Manual

AT Command Manual for Firmware L23
Description
This command will return AdcValue,RequestedAdc,MeasTime,BurstPower.
Parameters
<Adc>
0
3
4
<Meastime>
1
2
3
<AdcValue>
Integer
<TxPower>
Integer

8.6.12. +PSRIC RI behaviour

Description
Set RI behaviour
Get RI behaviour
Get supported values
Description
This command sets the Ring Indicator (RI) behaviour.
Parameters
<RImask>
0
1
2
4
WA_DEV_WISMO_UGD_012
Description
Battery voltage (Vbatt)
Reserved
Auxilliary ADC (AUX_ADC0)
Description
During transmit burst
Outside transmit burst
No constraint on transmit burst
Description
Voltage value read by ADC
Description
Tx power value applied during Tx burst if <MeasTime>=1, otherwise 0
Command
+PSRIC=<RImask>,<RIshape>
+PSRIC?
+PSRIC=?
Description
No RI indication
RI indication on incoming calls
RI indication on SMS reception
RI indication on Cell Broadcast Messages (CBM) reception
Rev 004
Proprietary AT Commands
Possible Response(s)
OK
+CME ERROR: <err>
+PSRIC: <RImask>,<RIshape>
OK
+CME ERROR: <err>
+PSRIC: (list of supported
<RImask>s),(list of supported
<RIshape>s)
OK
+CME ERROR: <err>
November 3, 2011 149