Cmec Mobile Termination Control Mode; Cind Indicator Control - Sierra Wireless AirPrime WS Series At Command Manual

AT Command Manual for Firmware L23
3.6.6.

+CMEC Mobile Termination control mode

Description
Select equipment
Get current settings
Get supported values
Parameters
<keyp>
0
<disp>
0
<ind>
0
3.6.7.

+CIND Indicator control

Description
Set MT indicators
Get MT indicator status
Get supported values
Parameters
<ind>
Integer type
WA_DEV_WISMO_UGD_012
Command
+CMEC=[<keyp>[,<disp>[,<ind>]]]
+CMEC?
+CMEC=?
Description
MT can be operated only through its keypad. Not relevant on WISMO products; do not
use.
Description
Only MT can write to its display. Not relevant on WISMO products; do not use.
Description
Only MT can set the status of its indicators (command +CIND can only be used to read
the indicators)
Command
+CIND=[<ind>[,<ind>[,...]]]
+CIND?
+CIND=?
Description
Range of corresponding <descr>
Rev 004
3GPP TS 27.007 Commands
Possible Response(s)
OK
+CME ERROR: <err>
+CMEC: <keyp>,<disp>,<ind>
OK
+CME ERROR: <err>
+CMEC: (list of supported <keyp>s),(list of
supported <disp>s),(list of supported <ind>s)
OK
+CME ERROR: <err>
Possible Response(s)
OK
+CME ERROR: <err>
+CIND: <ind>[,<ind>[...]]
OK
+CME ERROR: <err>
+CIND: (<descr>,(list of supported
<ind>s)) [,(<descr>,(list of supported
<ind>s))[...]]
OK
+CME ERROR: <err>
November 3, 2011 68