Sim Toolkit Command And Result Codes; Psstki Sim Toolkit Interface Configuration - Sierra Wireless AirPrime WS Series At Command Manual

AT Command Manual for Firmware L23
8.4.

SIM Toolkit Command and Result Codes

8.4.1.

*PSSTKI SIM Toolkit interface configuration

Description
Set mode
Get current mode
Get supported modes
Description
This command is to configure SIM toolkit by AT command.
Parameters
<mode>
0
1
2 (default)
3
Clarification
The AUTO-ACK mechanism is only possible for a subset of STK commands with user interaction.
AUTO-ACK is possible:
Where basic Yes/No responses are expected:

SEND SHORT MESSAGE

SEND SS

SEND USSD

SETUP CALL
Where MMI action is needed and Yes/No responses are expected when done (for the display
part):

SETUP MENU

REMOVE MENU

SETUP IDLE MODE TEXT

DISPLAY TEXT

PLAY TONE
WA_DEV_WISMO_UGD_012
Command
*PSSTKI=<mode>
*PSSTKI?
*PSSTKI=?
Description
STK by AT command is deactivated, only ME‟s MMI will receive SIM toolkit
notifications
STK by AT command is activated: SIM toolkit notification will first be sent to AT parser.
If an AT channel is connected, *PSSTK URC will be sent, *PSSTK AT command has
to be used to respond.
If no AT channel is connected: ME‟s MMI will receive the notification
APPI_STK_xxx_RSP is automatically sent.
*PSSTK URC is sent to AT user.
APPI_ATK_xxx_RSP is automatically sent.
Rev 004
Proprietary AT Commands
Possible Response(s)
OK
+CME ERROR: <err>
*PSSTKI: <mode>
OK
+CME ERROR: <err>
*PSSTKI: (list of supported <mode>s)
OK
+CME ERROR: <err>
November 3, 2011 131