4. ESD Guidelines
4.1.
SIM Card
Decoupling capacitors must be added according to the drawings below as close as possible to the
SIM card connectors on UIM1_CLK, UIM1_RST, UIM1_VCC and UIM1_DATA signals to avoid EMC
issues and to comply with the requirements of ETSI and 3GPP standards covering the SIM electrical
interface.
A typical schematic including SIM detection is provided below.
Figure 1.
EMC and ESD Components Close to the SIM
4119996
Rev 1.3
April 10, 2017
12