AT Command Manual for Firmware L23
Parameter
<mode>
0
1
8.6.7.
*PSPNNR EONS: PNN Display
Description
Get PNN
Test if command is
supported
Description
Set command is used to display the PNN (PLMN Network Name) name.
Parameter
<MCC>
String type
<MNC>
String type
<LAC>
String type
<PLMNName>
String type
8.6.8.
*PSAHPLMN Read AHPLMN
Description
Get AHPLMN information
WA_DEV_WISMO_UGD_012
Description
Disable presentation of notification
Enable presentation of notification
Command
*PSPNNR=<MCC>,<MNC>[,LAC]
*PSPNNR=?
Description
Mobile country code in numeric format (e.g. "208")
Description
Mobile network code in numeric format (e.g. "10")
Description
Location area code in numeric format
Description
PLMN name in alphanumeric format
Command
*PSAHPLMN?
Rev 004
Proprietary AT Commands
Possible Response(s)
*PSPNN: <PLMNName>
OK
+CME ERROR: <err>
OK
+CME ERROR: <err>
Possible Response(s)
*PSAHPLMN: <MCC>,<MNC>
OK
+CME ERROR: <err>
November 3, 2011
146