AT Command Manual for Firmware L23
Clarification
+CGEREP parameters are automatically saved into non-volatile memory.
3.11. Packet Domains Result Codes
3.11.1. +CGREG registration status
Description
Registration change
Parameters
<stat>
0
1
2
3
4
5
<lac>
String type
<ci>
String type
WA_DEV_WISMO_UGD_012
Result code
+CGREG: <stat>[,<lac>,<ci>]
Description
Not registered, MT is not currently searching an operator to register to
The GPRS service is disabled, the UE is allowed to attach for GPRS if requested by
the user
Registered, home network
Not registered, but MT is currently trying to attach or searching an operator to register
to
The GPRS service is enabled, but an allowable PLMN is currently not available. The
UE will start a GPRS attach as soon as an allowable PLMN is available.
Registration denied
The GPRS service is disabled, the UE is not allowed to attach for GPRS if requested
by the user.
Unknown
Registered, roaming
Description
Two bytes location area code in hexadecimal format (e.g. "00C3" equals 195 in
decimal)
Description
Two bytes cell ID in hexadecimal format
Rev 004
3GPP TS 27.007 Commands
November 3, 2011
98