Ta Response Format; Result Code Selection And Call Progress Monitoring - Sierra Wireless AirPrime WS Series At Command Manual

AT Command Manual for Firmware L23
Parameters
<char>
8 (default)
Clarification
S5 parameter is saved into non-volatile memory by AT&W command and restored to default value by
AT&F command.
4.3.6. V TA Response format
Description
Set response format
Parameters
<format>
0
1
Omitted
4.3.7. X Result code selection and call
monitoring
Description
Set result code selection
Parameters
<result>
0
1
2
3
4
WA_DEV_WISMO_UGD_012
Description
Editing character <BS>
Command
V[<format>]
Description
Responses in numeric format
Responses in verbose format
<format> 0 is used
Command
X<result>
Description
CONNECT result code is given upon entering online data state. Dial tone and busy
detection are disabled.
CONNECT <text> result code is given upon entering online data state. Dial tone and
busy detection are disabled.
CONNECT <text> result code is given upon entering online data state. Dial tone
detection is enabled, and busy detection is disabled.
CONNECT <text> result code is given upon entering online data state. Dial tone
detection is disabled, and busy detection is enabled.
CONNECT <text> result code is given upon entering online data state. Dial tone and
busy detection are both enabled.
Rev 004
ITU-T V25.ter Commands
Possible Response(s)
OK
0
ERROR
4
Possible Response(s)
OK
ERROR
November 3, 2011
progress
111