Clcc List Current Calls - Sierra Wireless AirPrime WS Series At Command Manual

AT Command Manual for Firmware L23
Description
Get current mode
Get supported values
Parameters
<n>
0 (default)
1
<m>
0 (default)
1
Clarification
+CSSN parameters are automatically saved into non-volatile memory.

3.4.17. +CLCC List current calls

Description
SS notification control
Test if command is supported
Parameters
<idx>
1..7
<dir>
0
1
<stat>
0
1
WA_DEV_WISMO_UGD_012
Command
+CSSN?
+CSSN=?
Description
Disable presentation of +CSSI
Enable presentation of +CSSI
Description
Disable presentation of +CSSU
Enable presentation of +CSSU
Command
+CLCC
+CLCC=?
Description
Call identification number
This number can be used in +CHLD command operations
Description
Mobile originated (MO) call
Mobile terminated (MT) call
Description
Active
Held
Rev 004
3GPP TS 27.007 Commands
Possible Response(s)
+CSSN: <n>,<m>
OK
+CSSN: (list of supported <n>s),(list of
supported <m>s)
OK
Possible Response(s)
[+CLCC: <id1>,<dir>,<stat>,<mode>,<mpty>[,<
number>,<type>[,<alpha>]][<CR><LF>+CLCC:
<id2>,<dir>,<stat>,<mode>,<mpty>[,<number>
,<type>[,<alpha>]][...]]]
OK
+CME ERROR: <err>
OK
+CME ERROR: <err>
November 3, 2011 56