Clac List All Available At Commands; Cala Set Alarm Time - Sierra Wireless AirPrime WS Series At Command Manual

For firmware l23
Table of Contents

Advertisement

AT Command Manual for Firmware L23
Clarification
If a melody is played, it is played for 10 seconds and stops.

3.6.26. +CLAC List all available AT commands

Description
List all commands
Test if command is
supported

3.6.27. +CALA Set alarm time

Description
Set alarm
Read alarm
Get supported values
Parameters
<time>
07/04/11,11:34:25
<n>, <n1>, <n2>
1..5
<recurr>
"0","1,..,7"
Clarification
Set command sets an alarm time in the MT. If setting fails in an MT error, +CME ERROR: <err> is
WA_DEV_WISMO_UGD_012
Command
+CLAC
+CLAC=?
Command
+CALA=<time>[,<n>[,<recurr>]]
+CALA?
+CALA=?
Description
Internal clock (Cf. +CCLK) string type "hh:mm:ss" if <recurr> is present or
"yy/mm/dd,hh:mm:ss" if not.
Description
Index of the alarm
Description
String type value indicating day of week for the alarm in one of the following formats:
"<1..7>[,<1..7>[...]]" – Sets a recurrent alarm for one or more days in the week. The
digits 1 to 7 corresponds to the days in the week, Monday (1), ..., Sunday (7).
Example: The string "1,2,3,4,5" may be used to set an alarm for all weekdays.
"0" sets a recurrent alarm for all days in the week.
Rev 004
Possible Response(s)
+CLAC:<CR><LF><AT Command1>[<CR><LF><AT
Command2>[...]]
OK
+CME ERROR: <err>
OK
+CME ERROR: <err>
Possible Response(s)
OK
+CME ERROR: <err>
[+CALA: <time>,<n1>,[<recurr>]
[<CR><LF>+CALA: <time>,<n2>,[<recurr>]
[...]]]
OK
+CME ERROR: <err>
+CALA: (list of supported <time>s),(list of
supported <n>s),(list of supported <recur>s)
OK
+CME ERROR: <err>
3GPP TS 27.007 Commands
November 3, 2011
82

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Wismo218Wismo228

Table of Contents