WAGO 750-830 Manual page 97

3.1.8.3 ETHERNET Libraries for WAGO-I/O-PRO CAA
Various libraries are available in WAGO-I/O-PRO CAA for different IEC
61131-3 programming tasks. These contain modules for universal use and can,
thereby, facilitate and speed up the creation of your program.
Additional Information
All libraries are included on the installation CD for the software
WAGO-I/O-PRO CAA in the folder directory:
CoDeSys V2.3\Targets\WAGO\Libraries\...
Some libraries, such as 'standard.lib' and 'IECsfc.lib' are normally incorpo-
rated; the ones described below, however, are specific to ETHERNET projects
with WAGO-I/O-PRO CAA:
Tab. 3-18: ETHERNET libraries for WAGO-I/O-PRO CAA
Library
Ethernet. lib
WAGOLibEthernet_01.lib
WAGOLibModbus_IP_01.lib Function blocks that can set up links with one or more
ModbusEthernet_03.lib
ModbusEthernet_04.lib
SysLibSockets.lib
WagoLibSockets.lib
Mail_02.lib
WAGOLibMail_01.lib
WagoLibSnmpEx_01.lib
WagoLibSntp.lib
WagoLibFtp.lib
These libraries are included on the WAGO-I/O-PRO CAA CD.
Once the libraries have been integrated, function blocks, functions and data
types will be available that you can use the same as ones you have specifically
defined.
WAGO-I/O-SYSTEM 750
BACnet/IP Controller
BACnet/IP Controller 750-830
Programming the PFC Using WAGO-I/O-PRO CAA
Contents
Function blocks for communication via ETHERNET
Function blocks that can set up a link to a remote server or
client PC via TCP protocol to exchange data with any po-
tential UDP server or client PC via UDP protocol
slaves
Function blocks that enable data exchange with several
MODBUS slaves
Function blocks for data exchange with several
MODBUS/TCP/UDP slaves
Also a function block that provides a MODBUS server that
maps the MODBUS services on a word array.
Function block for access to sockets for communication via
TCP/IP and UDP.
Function blocks for access to sockets for communication
via TCP/IP and UDP
Contains additional functions in addition to SysLibSock-
ets.lib
Function block for sending e-mails
Function block for sending e-mails
Function blocks for sending SNMP-V1 traps together with
the parameters for the type DWORD and STRING(120)
(starting with software version SW >= 07).
Function blocks for setting and using the simple network
time protocol (SNTP)
Function blocks for setting and using the file transfer pro-
tocol (FTP)
• 97