Time_Of_Active_Time_Reset; Time_Of_State_Count_Reset; Units - WAGO 750-830 Manual

6.75 Time_Of_Active_Time_Reset

Data Type
Objects
Description

6.76 Time_Of_State_Count_Reset

Data Type
Objects
Description

6.77 Units

Data Type
Objects
Description
Additional Information
The list of standardized Engineering Units can be found in the documentation
for the BACnet Library "BACnet_xx.lib" on the web site
http://www.wago.com
! Building Automation ! BACnet Downloads ! Software
WAGO-I/O-SYSTEM 750
BACnet/IP Controller
List of all BACnet Properties in Native Operation
Analog Input, Analog Output:
This property, of the type Unsigned, specifies the minimum
period of time in seconds that the Present_Value must re-
main outside the band defined by the High_Limit and
Low_Limit properties before a TO-OFFNORMAL event is
generated or within the same band, including the Deadband
property, before a TO-NORMAL event is generated.
BACnetDateTime
Binary Input, Binary Output
This property, of the type BACnetDateTime, represents the
date and time at which the Elapsed_Active_Time property
was most recently set to a zero value.
BACnetDateTime
Binary Input, Binary Output
This property, of the type BACnetDateTime, represents the
date and time at which the Change_Of_State_Count prop-
erty was most recently set to a zero value.
BACnetEngineeringUnits
Analog Input, Analog Output
This property, of the type BACnetEngineeringUnits, indi-
cates the measurement units of this object.
under Service ! Downloads
Time_Of_Active_Time_Reset
• 309