WAGO 750-830 Manual page 271

MP Bus Master Module
750-643
The MP Bus Master Module has a total of 8 bytes of user data in both the In-
put and Output Process Image (6 bytes of module data and 2 bytes of con-
trol/status). The following table illustrates the Input and Output Process Im-
age, which have 4 words mapped into each image. Word alignment is applied.
WAGO-I/O-SYSTEM 750
BACnet/IP Controller
Input and Output Process Image
Byte Destination
Offset
High Byte
0 C1/S1
1 D1
2 D3
3 D5
Process Data Architecture for MODBUS/TCP
Low Byte
extended Con-
C0/S0
trol/Status byte
D0
D2
D4
I/O Modules
Remark
Control/Status
byte
Data bytes
• 271