WAGO 750-830 Manual page 101

Tab. 3-19: Task priorities
Priority
0
1
2
3
Definition: Processes with the highest priority are identified by the lowest
Additional Information
For a detailed description of the programming tool WAGO-I/O-PRO CAA
refer to the manual WAGO-I/O-PRO CAA at
Documentation ! WAGO-I/O-SYSTEM759 ! WAGO-I/O-PRO ! 759-333
WAGO-I/O-SYSTEM 750
BACnet/IP Controller
Programming the PFC Using WAGO-I/O-PRO CAA
Task
(high) Internal bus task, fieldbus task
Normal task
PLC-Comm task
(low) Background task
numbers. These processes are handled by all other processes.
BACnet/IP Controller 750-830
http://www.wago.com
• 101
under: