Standards And Regulations For Operating The 750 Series - WAGO 750-830 Manual

8 • Important Notes

Standards and Regulations for Operating the 750 Series

1.2 Standards and Regulations for Operating the 750 Series
Please observe the standards and regulations that are relevant to your installa-
tion:
• The data and power lines must be connected and installed in compliance
• For installation, startup, maintenance and repair, please observe the acci-
• Emergency stop functions and equipment must not be made ineffective.
• Your installation must be equipped in accordance to the EMC guidelines
• Operating 750 Series components in home applications without further
• Please observe the safety measures against electrostatic discharge accord-
• The relevant valid and applicable standards and guidelines concerning the
with the standards to avoid failures on your installation and eliminate any
danger to personnel.
dent prevention regulations of your machine (e.g. BGV A 3, "Electrical In-
stallations and Equipment").
See relevant standards (e.g. DIN EN 418).
so that electromagnetic interferences can be eliminated.
measures is only permitted if they meet the emission limits (emissions of
interference) according to EN 61000-6-3. You will find the relevant in-
formation in the section on "WAGO-I/O-SYSTEM 750" ! "System De-
scription" ! "Technical Data".
ing to DIN EN 61340-5-1/-3. When handling the modules, ensure that the
environment (persons, workplace and packing) is well grounded.
installation of switch cabinets are to be observed.
WAGO-I/O-SYSTEM 750
BACnet/IP Controller