WAGO 750-830 Manual page 89

Fig. 3-2: HTML pages of the Web-based management system
Note
If these pages are not displayed for local access to the fieldbus nodes, you
must define in the Web browser properties that, as an exception, no proxy
server is to be used for the node IP address.
Note
If DHCP and BootP are activated and an ISDN/DSL router is incorporated in
the network (factory default settings with DHCP server), addresses will be
assigned automatically after a loss of power (loss of 24-V-DC power to con-
troller) from the address range for the ISDN/DSL router. As a result, all con-
trollers will be assigned new IP addresses!
4. In the left navigation bar click on Port to open the HTML page for select-
WAGO-I/O-SYSTEM 750
BACnet/IP Controller
ing a protocol.
BACnet/IP Controller 750-830
Fieldbus Node Start-up
• 89
G083050e