WAGO 750-830 Manual page 48

48 • BACnet/IP Controller 750-830
Hardware
3.1.3 Hardware
3.1.3.1 View
Fig. 3-1: BACnet/IP Controller
The controller in detail:
• A power supply unit for the system supply and power jumper contacts for
• Two fieldbus connections (RJ45 and RS232)
• LEDs as status display of the operation, the bus communication, the oper-
• Service interface, alternative for programming and configuration (see
• Operating mode switch (see 3.1.3.6)
fieldbus
connection
RJ45
fieldbus
connection
RS232
service interface
as a configuration and
programming interface
(flap open)
the field supply via bus modules.
ating voltages as well as for error messages and diagnostics
3.1.3.5)
BACnet/IP
01 02
power supply status
LINK
A
ACT - system
C
B
BT
- power contacts
D
MS
24V 0V
data contacts
NS
24V
0V
I/O
+ +
USR
24V
_ _
0V
power contacts
mode switch
bus coupler power supply
power contacts supply
WAGO-I/O-SYSTEM 750
BACnet/IP Controller
G083000e