WAGO 750-830 Manual page 123

WebVisu
Use the link "WebVisu" to open an HTML page displaying the visualization
for your programmed application, provided this has been previously created in
WAGO-I/O-PRO CAA and saved to the controller.
Fig. 3-22: Web-based Management System: WebVisu
A visualization editor is integrated into WAGO-I/O-PRO CAA in order to
visualize data of the application programmed with WAGO-I/O-PRO CAA.
After selecting the "Web visualization option ("Resources" tab ! Target sys-
tem settings ! "Visualization" tab) in WAGO-I/-PRO CAA, an HTML page
is created automatically with visualization when compiling the project. A link
is then created to this page by the Web-based Management system, so that
"WebVisu" is also displayed at this Web page.
You can set "WebVisu" as the starting (default) page. To do this, open the
Web page using the "PLC" link and activate the function "Default webpage -
Set, webvisu.huml as default." When the Web-based management system is
accessed, the "WebVisu" page will be opened instead of the normal "Status In-
formation" page.
Note
The "Webvisu.htm" page does not have any hyperlinks to other Web pages.
To deactivate the starting page function, or to access other pages using hyper-
links, enter the IP address for your controller and the address for the original
starting page in the URL line of your browser with the following syntax:
http://IP address of your controller/webserv/Index.ssi.
WAGO-I/O-SYSTEM 750
BACnet/IP Controller
BACnet/IP Controller 750-830
Programming the PFC Using WAGO-I/O-PRO CAA
• 123