WAGO 750-830 Manual page 191

4.1.3.4 Application Protocols
If fieldbus specific application protocols are implemented, then the appropri-
ate fieldbus specific communication is possible with the respective cou-
pler/controller. Thus the user is able to have a simple access from the respec-
tive fieldbus on the fieldbus node. There are based on ETHERNET cou-
plers/controllers available developed by WAGO, with the following possible
application protocols:
• MODBUS TCP (UDP)
• EtherNet/IP
• BACnet/IP
• KNXnet/IP
• PROFINET
• Powerlink
• SERCOS III
Additional Information
You can find a list of the exact available implemented protocols in the chapter
"Technical Data" to the fieldbus coupler and/or controller.
If fieldbus specific application protocols are implemented, then these protocols
are individual described in the following chapters.
WAGO-I/O-SYSTEM 750
BACnet/IP Controller
Fieldbus Communication
ETHERNET
• 191