Standards And Guidelines For Operating The 750 Series - WAGO 750-404 Manual

1.1.5 Standards and Guidelines for Operating the 750 Series

Please adhere to the standards and guidelines required for the use of your
system:
 The data and power lines shall be connected and installed in compliance
 For assembly, start-up, maintenance and troubleshooting, adhere to the
 Emergency stop functions and equipment shall not be made ineffective.
 The equipment of your system shall be conform to EMC guidelines so that
 Operating 750 Series components in home applications without further
 Please observe the safety precautions against electrostatic discharge in
 The valid standards and guidelines applicable for the installation of switch
WAGO-I/O-SYSTEM 750
I/O Modules
with the standards required to avoid failures on your system and to
substantially minimize any imminently hazardous situations resulting in
personal injury.
specific accident prevention provisions which apply to your system (e.g.
BGV A 3, "Electrical Installations and Equipment").
See relevant standards (e.g. DIN EN 418).
any electromagnetic interferences will be eliminated.
measures is permitted only if they meet the emission limits (emissions of
interference) in compliance with EN 61000-6-3. You will find the detailed
information in section "WAGO-I/O-SYSTEM 750"  "System
Description"  "Technical Data".
accordance with DIN EN 61340-5-1/-3. When handling the modules,
please ensure that environmental factors (persons, working place and
packaging) are well grounded.
cabinets shall be adhered to.
Important Notes
Legal Bases
• 7