Table of Contents
Advertisement
sync
Syntax
sync [port port-id | lag-id]
Context
show>redundancy>multi-chassis
Description
This command displays synchronization information.
Parameters
port port-id — Shows the specified port ID of the multi-chassis peer.
lag lag-id — Shows information for the specified LAG identifier.
Output
Show Redundancy Multi-chassis Sync Output — The following table describes show redun-
dancy multi-chassis sync output fields:
Table 27: Show Redundancy Multi-chassis Sync Output Fields
7710 SR OS Basic System Configuration Guide
Values
1 — 64
Label
Peer IP Address
Description
Authentication
Source IP Address
Admin State
Client Applica-
tions
Sync Admin State
Sync Oper State
DB Sync State
Num Entries
Lcl Deleted
Entries
Alarm Entries
Rem Num Entries
Rem Lcl Deleted
Entries
Rem Alarm Entries
Displays the multi-chassis redundancy peer.
The text string describing the peer.
If configured, displays the authentication key used between this node
and the multi-chassis peer.
Displays the source address used to communicate with the multi-chas-
sis peer.
Displays the administrative state of the peer.
Displays the list of client applications synchronized between SRs.
Displays the administrative state of the synchronization.
Displays the operation state of the synchronization.
Displays the database state of the synchronization.
Displays the number of entries on local router.
Displays the number of deleted entries made at the local router.
Displays the alarm entries on the local router.
Displays the number of entries on the remote router.
Displays the number of locally deleting entries made by the remote
router.
Displays alarm entries on the remote router.
System Management
Description
Page 393
Advertisement
Table of Contents
