Table 7: Show System Security Authentication Output Fields - Alcatel-Lucent 7210 SAS E OS System Management Manual

Security Commands
snmp-trap
snmp-trap
===============================================================================
A:ALA-7#
authentication
Syntax authentication [statistics]
Context show>system>security
Description
This command displays system login authentication configuration and statistics.
Parameters statistics — Appends login and accounting statistics to the display.
Output Authentication Output — The following table describes system security authentication output
fields.

Table 7: Show System Security Authentication Output Fields

Page 130
snmpv1
snmpv2c
Label
Sequence
Server address
Status
Type
Timeout (secs)
Single connection
Retry count
Connection errors
Accepted logins
Rejected logins
Sent packets
Rejected packets
none
none
The sequence in which authentication is processed.
The IP address of the RADIUS server.
Current status of the RADIUS server.
The authentication type.
The number of seconds the router waits for a response from a RADIUS
server.
Enabled — Specifies a single connection to the TACACS+ server
and validates everything via that connection.
Disabled — The TACACS+ protocol operation is disabled.
Displays the number of times the router attempts to contact the
RADIUS server for authentication if there are problems communicat-
ing with the server.
Displays the number of times a user has attempted to login irrespective
of whether the login succeeded or failed.
The number of times the user has successfully logged in.
The number of unsuccessful login attempts.
The number of packets sent.
The number of packets rejected.
7210 SAS-E OS System Management Guide
iso
iso
Description